Gutter Replacement Cost in Frankston & the Mornington Peninsula (2026 Guide)

For an average single-storey home in Frankston or on the Mornington Peninsula, a full Colorbond gutter replacement typically costs between $1,500 and $4,000 in 2026, and replacing a downpipe starts from about $180 each. Those are indicative figures for Melbourne’s south-east and every job is confirmed on inspection, but they are a realistic starting point for budgeting. The rest of this guide explains what sits behind those numbers, what pushes a quote up or down, and how to tell whether you need new gutters at all.
Gutter and downpipe quotes vary more than most people expect. Two houses on the same street can come back with very different prices because one has rotten fascia behind the old gutters, more corners, or a second storey that needs edge protection. Mike has been quoting gutter work across Frankston, the Peninsula and the City of Casey since 2010, and the same handful of factors explain almost every difference.
Gutter Replacement Cost at a Glance (2026)
All figures below are indicative for Melbourne’s south-east, based on Colorbond steel supplied and installed, and are confirmed on inspection. They are a guide, not a quote.
- <strong>Full gutter replacement, average single-storey home:</strong> $1,500–$4,000, depending on lineal metres, profile and access.
- <strong>Colorbond gutter, per lineal metre installed:</strong> roughly $55–$85, including brackets, stop ends and standard corners.
- <strong>Zincalume (unpainted) gutter, per metre installed:</strong> roughly $45–$65. Not our first choice near the bay (see below).
- <strong>Colorbond Ultra (coastal grade), per metre installed:</strong> roughly $70–$100. Worth considering for homes close to the beach in Seaford, Frankston and Mornington.
- <strong>Downpipe replacement:</strong> from $180 per downpipe, typically $180–$350 each supplied and fitted, with multiple downpipes priced lower per pipe.
- <strong>Gutter repairs (leaking joint, loose bracket, short section):</strong> from $200.
- <strong>Gutter guard added at the same time:</strong> from $800 for a typical home, depending on mesh type and roof profile.
- <strong>Larger or double-storey homes:</strong> usually above the average range because of extra metres, more corners and access equipment. Quoted after inspection.
If you want the long version of what each service involves, our <a href="/services/gutter-replacement-repairs">gutter replacement and repairs</a> and <a href="/services/downpipe-replacement">downpipe replacement</a> pages cover the process step by step.
What a Gutter Replacement Quote Includes
A proper written quote is not one number pulled from the air. When we quote a gutter job it covers:
- <strong>Materials:</strong> the gutter itself, brackets, pops (outlets), stop ends, internal and external corners, sealant and rivets, plus downpipes and clips if they are part of the job.
- <strong>Labour:</strong> removing the old gutters, checking the fascia, setting a string line so the new gutters fall correctly towards each downpipe, and fitting everything off.
- <strong>Access and safety:</strong> ladders and harnesses on most single-storey homes; temporary edge protection or scaffold where a second storey or steep block calls for it.
- <strong>Removal and disposal:</strong> taking the old steel away for recycling and leaving the site clean.
- <strong>Warranty:</strong> our 10-year workmanship warranty, on top of the manufacturer’s material warranty on Colorbond steel.
If a quote you receive is well below the others, ask which of these it leaves out. The usual gaps are fascia repairs, downpipes and disposal, which then turn up as extras on the day.
Cost Per Metre: Choosing the Right Gutter Material
Most gutter work is priced per lineal metre, so after the size of the house, the material you choose has the biggest effect on the final figure.
Colorbond Steel
Colorbond is what we fit on the large majority of homes. The steel is coated with a corrosion-resistant alloy, primed and then finished with a baked-on colour, which is why it lasts so much longer than bare steel in salt air. It comes in more than 20 standard colours, so it can be matched to the fascia, the roof or the window frames. Our guide to <a href="/blog/colorbond-roofing-advantages-peninsula">Colorbond on the Peninsula</a> covers the material in more detail.
Zincalume
Zincalume is the same base steel without the paint system. It is cheaper per metre and perfectly good in sheltered inland suburbs such as Narre Warren, Berwick or Cranbourne, but we rarely recommend it for bayside homes. Once the cut edges and fixings start to weather, salt gets to work faster on the unpainted surface.
Colorbond Ultra and Other Coastal Grades
For homes close to the water in Seaford, Frankston, Mount Eliza and Mornington, a coastal-grade product like Colorbond Ultra adds a few dollars a metre and buys years of extra life. On a 40-metre gutter run the difference is often a few hundred dollars across the whole job, which is cheap insurance against replacing rusted gutters again in a decade.
Gutter Profiles
Quad (D-profile) is the standard on most brick veneer homes from the 1960s to the 1990s. Half round and OG (ogee) suit older weatherboard and period homes, and square-line or fascia gutters are common on newer builds. Profile has a smaller effect on price than material, but matching an existing profile for a partial replacement can be difficult if it has been discontinued.
Downpipe Replacement Cost
Downpipes are quoted separately because they fail on a different schedule from gutters, and the job itself is different. A single downpipe replacement in Colorbond starts from about $180, and most sit between $180 and $350 supplied and fitted, with the per-pipe price coming down when several are done on the same visit. These are indicative figures for Melbourne’s south-east and are confirmed on inspection.
When a Downpipe Needs Replacing
- Rust holes or splits, usually at the back where the pipe sits against the wall and stays damp
- Joints that have pulled apart, so water sprays onto the brickwork in heavy rain
- Old PVC that has gone brittle and cracked in the sun, or been crushed at the base
- A downpipe that is too small or too far from where the water collects, so the gutter overflows in a downpour
- Blockages that keep coming back because the pipe has a sag or a crushed section underground
What Changes the Downpipe Price
- <strong>Length and height:</strong> a double-storey downpipe is longer and needs safer access than a single-storey one.
- <strong>Size and shape:</strong> 90 mm round or 100 x 50 mm rectangular Colorbond are the usual choices. Rectangular handles more water and sits neatly against a wall.
- <strong>Bends and offsets:</strong> every elbow needed to get around eaves, windows or meter boxes adds a fitting and some time.
- <strong>Stormwater connection:</strong> replacing like for like is quick. Adding a new downpipe where there was none means a new outlet in the gutter and a connection to the stormwater system, which may need a plumber and is priced separately.
Undersized or missing downpipes are one of the most common reasons we see new gutters overflow. If your gutters fill and spill at one corner every time it rains hard, an extra downpipe is often the fix, not bigger gutters. See our <a href="/services/downpipe-replacement">downpipe replacement service</a> for how we handle colour matching and stormwater connections.
What Pushes a Gutter Quote Up or Down
- <strong>Lineal metres.</strong> The single biggest factor. A small unit might have 20–25 m of gutter; a four-bedroom home with a return verandah can have 60 m or more.
- <strong>Height and access.</strong> Double-storey homes, steep blocks in Frankston South and Mount Eliza, and houses hard against a fence line all need more time and equipment.
- <strong>Corners.</strong> Each internal or external corner has to be cut, joined, sealed and riveted. A simple rectangle has four; a complex roofline can have twelve or more.
- <strong>Fascia condition.</strong> New gutters cannot be screwed to rotten timber. If the fascia behind the old gutters is soft, it is repaired or capped with Colorbond fascia cover first. This is the most common unplanned extra.
- <strong>Downpipes.</strong> Keeping the existing downpipes is cheapest. Replacing them adds the per-pipe figures above; adding new ones adds plumbing.
- <strong>Material grade and colour.</strong> Coastal-grade steel and some non-standard colours cost more per metre.
- <strong>Extras done at the same time.</strong> Gutter guard, valley guard or fascia cover are cheaper to add while the gutters are off than as a separate job later.
💡 Pro Tip: <strong>Bundle the work.</strong> If your roof also needs attention, having gutters replaced as part of a <a href="/services/roof-restoration">roof restoration</a> saves on access set-up and means the new Colorbond goes on after the roof is cleaned and coated, not before.
Repair or Replace? How We Decide
A surprising number of gutter calls end in a repair, not a replacement. Here is the test we apply on site.
A Repair Is Usually Enough When
- One joint or corner is leaking and the surrounding metal is sound
- A bracket has let go or the gutter has pulled away in one spot
- Rust is on the surface only and has not gone through
- A short section has been damaged by a branch or a ladder
Replacement Makes More Sense When
- Rust has gone through the base of the gutter in more than one place (if a screwdriver goes through, it is finished)
- The gutter holds water after rain because it has sagged or was never installed with fall
- Several joints are leaking, so sealing one just moves the problem along
- The profile is obsolete and matching sections cannot be bought for a partial replacement
- The fascia behind it is rotting and needs to come off anyway
If a repair will honestly buy you another five years, that is what we quote. Replacement is only recommended when patching would cost you more in repeat visits. Our <a href="/blog/clogged-gutters-cause-roof-leaks">guide to how blocked gutters cause roof leaks</a> explains what is happening behind the fascia when gutters overflow for a long time.
Why Peninsula Gutters Wear Out Faster
Searching “gutter replacement cost” brings up a lot of advice written for inland suburbs. Bayside homes are different in two ways. Salt carried on the wind off Port Phillip Bay and Western Port settles on steel and speeds up corrosion, especially at cut edges, pop rivets and anywhere water sits. And the wind itself puts more load on brackets, so gutters that are under-fixed start to sag and hold water sooner.
That is why we lean towards Colorbond over bare steel on the Peninsula, consider coastal-grade product close to the water, and fit brackets closer together than the minimum on exposed sites. It costs a little more up front and avoids doing the job twice.
How to Get an Accurate Gutter Quote
You can get a rough idea yourself in ten minutes: walk the perimeter of the house and measure every edge with a gutter, count the corners, count the downpipes and multiply the metres by the per-metre figures above. For a written quote we visit, because the things that move the price most (fascia condition, access, how the old system was fixed on) can only be seen from a ladder.
On a site visit we check the fascia behind the gutters, the fall of the existing system, the number and size of downpipes against the roof area draining into them, where stormwater connects, and the colour and profile to match. You get a written quote that lists materials, metres and any fascia work separately, so you can compare it line by line with anyone else’s.
Keeping New Gutters Cheap to Own
New gutters should last 20 years or more on the Peninsula if they are looked after. The maintenance is simple:
- <strong>Clean them twice a year</strong>, in autumn after leaf fall and in late spring before storm season. Under gum trees or pines, quarterly. Our <a href="/services/gutter-cleaning">gutter cleaning service</a> includes a downpipe flush and photos.
- <strong>Fit gutter guard</strong> if the house sits under trees in Langwarrin, Mount Eliza or Frankston South. <a href="/services/gutter-guard-installation">Quality mesh guard</a> cuts cleaning back to a flush every year or two.
- <strong>Keep branches off the roof.</strong> Leaf litter and salt together are the fastest way to rust a gutter.
- <strong>Look up after big storms.</strong> If water pours over one spot, something has moved or blocked.
There is an insurance angle too. Most home policies exclude damage caused by lack of maintenance, so a record of regular gutter cleaning helps if you ever need to claim for storm damage. Our article on <a href="/blog/home-insurance-roof-maintenance-gutters">home insurance and roof maintenance</a> covers what insurers look for.
Get a Written Gutter or Downpipe Quote
We are a local, owner-operated team based in Narre Warren, working across Frankston, the Mornington Peninsula and the City of Casey since 2010. Mike quotes every gutter and downpipe job himself, uses Colorbond steel, and backs the installation with a 10-year workmanship warranty. Quotes are free and written, and if a repair is all you need, a repair is all we quote.
Want to know what your gutters or downpipes will actually cost? Call Mike on 0437 641 027 or request a free quote online. Tell us the suburb, roughly how many metres of gutter and whether the house is single or double storey, and we will give you a realistic range before we visit.
Related Services
Serving Frankston, Mornington Peninsula & South-East Melbourne
We provide expert roofing services across these suburbs and surrounding areas. Click your suburb for local information and a free quote.
Frequently Asked Questions
How much does gutter replacement cost per metre in 2026?
For Colorbond steel supplied and installed, roughly $55 to $85 per lineal metre is a realistic 2026 figure for Melbourne’s south-east, including brackets and standard corners. Coastal-grade steel sits higher. Treat per-metre rates as indicative only: fascia repairs, downpipes and access can move a quote by more than the material does, which is why we confirm every price on inspection.
How much does it cost to replace a downpipe?
A single Colorbond downpipe starts from about $180 supplied and fitted, with most sitting between $180 and $350 depending on length, bends and whether the home is single or double storey. Doing several in one visit brings the per-pipe price down. Adding a new downpipe where there was not one before costs more because it needs a new outlet and a stormwater connection. All figures are indicative for Melbourne’s south-east and confirmed on inspection.
How long does gutter replacement take?
Most single-storey homes are done in one to two days, including removing the old gutters and downpipes. Larger or double-storey homes, or jobs that uncover rotten fascia, can take longer. We give you the expected time with the quote.
Should I replace gutters before or after a roof restoration?
After, if you are doing both. Cleaning and coating a roof is messy, and we would rather the new Colorbond goes on once that is finished. Doing both in one project also saves on access set-up, so it is usually cheaper than two separate jobs a year apart.
Can I replace just one section of gutter?
Yes, if the rest of the run is sound and the profile is still available. Quad is easy to match; some 1980s profiles are not. If the damaged section is one of several rusting spots, a full run is often better value than a patch that will need its neighbour replaced next year. We will tell you which applies to your house.
Will home insurance pay for new gutters?
Usually not for gutters that have simply rusted out, because insurers treat that as wear and tear. Damage from a specific storm event, such as a branch crushing a gutter, may be covered. Keep photos and a record of cleaning; it makes a claim much easier to support.
Need Help With Your Roof?
Get a free, no-obligation inspection and quote. We'll give you honest advice — even if that means telling you it just needs minor repairs.



